product assembly           installation    

Contractors...

 

 

EnergyEdge EE8fb rail on basement wall

 

Installation Techniques

Products can be installed using numerous techniques and foundation types including:

Mono Pour

 Rough Foundation Pre-leveled Foundation

Crawl Space &

Basements

   Retrofit/

Existing

  

EnergyEdge EE8fb rail set on rough foundation using external support system

EnergyEdge EE8fb rail set for monolithic pour using external support system

EnergyEdge EE8fb rail on pre-leveled foundation using internal bracing system

 

 

Top

EnergyEdge® rails can be used in place of, or in addition to wooden form boards.  These products remain in place after construction reducing labor efforts with less stripping and recovery of forming materials there by reducing waste, hauling, and landfill costs. 

The EnergyFlash rail, EF210 is 8' long.  The corners are prefabricated and come in boxes. 

There are no "pre-assembly" requirements for this product.

The EnergyEdge system has two profiles- EE8fb and the EE8mb.  Both are assembled in the same manner.  The rails are 12' long and are nested together for shipping.  The braces & corner pieces come in boxes.  The braces "clip" into the bottom and top of each rail and serve as the joints and anchors into the concrete.  See installation techniques for quantity & spacing requirements. 

Product Assembly        

 

 

 

 

 

 

 

 

 

 

 

Top

 

Contact Us Home Site Map

P: (316) 618-1983      

F: (316) 684-3984      

7701 E. Kellogg, Ste 722

Wichita, Kansas 67207

www.EnergyEdgeForm.com

Info@EnergyEdgeForm.com