EnergyEdge® products are designed to meet minimum energy standards and have been included in codes since 1989. Beyond the rules and recommendations is the proof that insulation works as a barrier between the outdoor climate and the controlled interior space.
Using
Energy Edge is not an "above-and-beyond" addition to the thermal envelope- it
is the basic requirement for code compliance. EnergyEdge products have been designed as a
direct result of increased pressure on design professional and
contractors to build with energy performance in mind. Guidelines for a
properly insulated slab have been in place since 1989 with research dating
back to the 50's.
EnergyEdge products work! The FLIR photos above show the amount of energy that can be lost when insulation is not properly installed. Studies show that between 8%-24% of a buildings energy loss is through an un-insulated slab edge. Energy Edge protects the most critical point of energy loss at this area- the exposed slab edge.
Energy Edge products are an inexpensive way to save money every month. By properly protecting your building with a complete thermal envelope you will receive the greatest return on your dollar starting immediately. The chart to the right shows the slight increase in the mortgage payment- accounting for use of the product and the projected utility bills in each situation. The difference is an estimated savings of $200/year. (Based on typical weather in Kansas)
